Poster Grippers

White or black plastic end cap designed to fit our 656, 658, 658S and 603S tubes.

From: £0.063

Clear polyethylene poster hook. Photographed with our 5200D Suction Cup and 3030RB Poster Gripper.

From: £0.043

White polyethylene end cap designed to fit our 601 and 601S tubes.

From: £0.058

White or black oval PVC extrusion for paper and card signs with groove on top to take 560 Slide Hanger. Cut to length. Colours available subject to quantity. 25mm deep. Photo shows our 559E end cap.

From: £0.179

PVC Joiner for connecting 559 Poster Gripper to create long or continuous poster runs

White or black plastic hanger with 7.5mm diameter hole for use with 565, 559, 658 and 659 POSTER GRIPPER sections.

From: £0.055

White or Black extruded PVC poster gripper with top channel to take 560 Slide Hanger. Supplied cut to the required length. Colours available subject to quantity. 16mm deep

From: £0.090

Extruded PVC snapshut poster gripper for paper and other thin material with top channel for our 560 and 5600 slide hangers. Supplied cut to the required length.

From: £0.209

White or black extruded and slit 19mm dia PVC tube for posters. Posters are normally retained with a line of staples along the edge of the poster which is then fed into the tube. Colours available subject to quantity. Supplied cut to the required length.

White or black extruded PVC tube for posters. Top channel is designed to fit our 560 or 5600 Slide Hangers. Colours available subject to quantity. Supplied cut to required length. 25mm diameter tube.

From: £0.199

White, black or coloured end plugs to give a neat flush finish to our 658 extrusions.

From: £0.097

White or black extruded PVC tube posters. Colours available subject to quantity. Supplied cut to the required length. 32mm diameter tube.

From: £0.204

White or black high impact styrene ball end designed to fit our 659, 659S, 604 and 604S tubes. Colours available subject to quantity.

From: £0.368

White or black plastic hanger with 5.5mm diameter hole for use with 565, 559, 658 and 659 Poster Gripper sections

From: £0.033

Silver anodised aluminum snap shut poster gripper for material up to approx 1.5mm thick. Supplied in sets comprising of one top section complete with slide hangers and bottom section. Fully assembled ready for use. Supplied cut to the required length.

Polypropylene slide in tab with 3mm hole and slot for suspending monofilament or mobile string.

From: £0.029

Clear or Black PVC snap shut poster gripper with flexible gills and top channel for 5600 slide hangers. supplied cut to the required length. 20mm deep.

From: £0.312

White or Black tube extrusion with opposite channels for our 560, 5600 & 5610 slide hangers and tabs. Can be used to suspend many versatile hanging displays with our tube joiners. Supplied cut to the required length. 25mm diameter tube.

From: £0.200

White H.I. styrene push fit connecting piece. Connects 25mm diameter tube products.

From: £0.266

Clear polypropylene end cap designed to fit 556 fabric poster gripper.

From: £0.032

White H.I. styrene 90 degree push fit connecting piece. Connects 25mm diameter tube products.

From: £0.629

Slide in connector for connecting two channel grippers together

From: £0.155

White,black or coloured end plugs to give a neat flush finish to our 659 extrusions

From: £0.099

Clear PVC poster gripper with flexible gills and top channel for 5600 slide hangers. Supplied cut to the required length. 14mm deep

From: £0.240

Clear polypropylene end cap designed to fit 556 fabric poster gripper.

From: £0.064

White H.I. styrene 'X' push fit connecting piece. Connects 25mm diameter tube products.

From: £0.675

White powder cost finished aluminium track with easy glide hangers. Holes for screw fixing to ceiling. 1.9m long. Other sizes to order

White powder coat finished aluminium track with easy glide hangers. Holes for screw fixing to wall or pelmet. 1.9m long. Other sizes to order.

Clear round back extruded PVC poster gripper for paper. Supplied cut to the required length. 15mm deep.

From: £0.064

Clear square edged extruded PVC poster gripper for paper. Supplied cut to the required length. 12mm deep.

From: £0.068

White or black high impact styrene ball end designed to fit our 656, 658, 658S and 603S tubes. Colours available subject to quantity.

From: £0.373

Clear plastic hanger with 7.5mm diameter hole for use with 565, 559, 658 and 659 POSTER GRIPPER sections.

From: £0.054

Clear plastic hanger with 5.5mm diameter hole for use with 565, 559, 658 and 659 POSTER GRIPPER sections.

From: £0.037

White or black extruded and slit PVC tube for posters. Colours available subject to quantity. Supplied cut to the required length. 25mm diameter tube.

White or black extruded PVC tube posters. Colours available subject to quantity. Supplied cut to the required length. 25mm diameter tube.

From: £0.192

White or black extruded PVC tube for posters. Colours available subject to quantity. Supplied cut to the required length. 32mm diameter tube.

White or black extruded PVC tube for posters. Top channel is designed to fit our 560 or 5600 Slide Hangers. Colours available subject to quantity. Supplied cut to required length. 32mm diameter tube.

From: £0.216

Easy to use snap shut clear PVC Hinged Gripper with top channel for 5600 slide hangers Supplied cut to required length. 18mm deep.

From: £0.164

Silver finished extruded PVC poster gripper for paper and card with top channel for 560 and 5600 slide hangers. Supplied cut to the required length. 25mm deep.

From: £0.256

Silver extruded PVC snapshut poster gripper for paper and thin material with top channel for our 560 and 5600 slide hangers. Supplied cut to the required length. 19mm deep.

From: £0.263

Budget Version - Clear and black extruded PVC snapshut poster gripper for paper and other thin material with top channel for our 560 and 5600 slide hangers. Supplied cut to the required length.

From: £0.153

White polypropylene extruded pole gripper with 2279-A Mobile Button. Designed to fit 604S, 659 or 659S tubes.

White H.I. styrene push fit 'T' connecting piece. Connects 25mm diameter tube products.

From: £0.622

Black or white extruded PVC tube with 12mm channel to take Supergrip paper/card holders. Top channel takes our 560 and 5600 slide hangers. 5100E end cap available

From: £0.287

White or Black round back extruded PVC poster gripper for paper. Supplied cut to the required length. 15mm deep.

From: £0.060

White or Black square edged extruded PVC poster gripper for paper. Supplied cut to the required length. 12mm deep.

From: £0.060

Clear extruded PVC poster gripper with top channel to take 560 Slide Hanger. Supplied cut to the required length. 16mm deep

From: £0.110

Clear PVC poster gripper with flexible gills and top channel for 5600 slide hangers. Supplied cut to the required length. 20mm deep for material 3-6mm thick

From: £0.233