- You are here:
- Home
- >
- Label Holders
- >
- Label Holders
- >
- Label Holder For Metro Shelving
Label Holder For Metro Shelving
Product No. 926
- Product Description
Clear PVC specially designed for a secure fit with Metro wire shelving. Supplied cut to the required length. 39mm label depth.
Product images / Tech Specs
More Label Holders products
Product No.
917
Flat Shelf Label Holder
Clear front, white back, angled extruded PVC scanner rail/labelholder for fitting to top of shelves. Colours available subject to minimum quantity. Supplied fitted with self adhesive tape and cut to the required length. 38mm label depth
Product Nos.
1022-17 17mm label depth
1022-26 26mm label depth
1022-30 30mm label depth
1022-32CM 32mm label depth
1022-35CM 35mm label depth
1022-39CM 39mm label depth
1022-52 52mm label depth
1022-76 76mm label depth
1022-60 60mm label depth
1022-39 39mm label depth
Self Adhesive Label Holder / Scanner Rail / SEL
Clear or diffused front PVC self adhesive Scanner Rail / Label Holder / Shelf Edge Label Holder (SEL) with white or clear back. Colours subject to minimum quantity. Can be cut to any length less than 1.32m
Product Nos.
1023-13 13mm label depth
1023-22 22mm label depth
Self Adhesive Label Holder / Scanner Rail / SEL
Small format clear PVC Self Adhesive Label Holder / Scanner Rail / SEL. Ideal for simple label holder on shelf edges. Can be cut to any length below 1.32m
Product No.
923
Top Tape Adaptor
Extruded clear PVC with adhesive tape. Allows self adhesive label holder to be applied and angled at 20 degrees
Product No.
963
Glass Clip
Extruded clear PVC 35mm long glass clip. Fits glass and wire shelves 5-8mm thick
Product No.
982
Variable Angle Clip
Extruded clear PVC clip with adhesive tape. Fits variable angle shelves with hinge action.
Product No.
925-32
Universal Flip Strip
Co-extruded clear/white PVC with unique channel on back which takes clips to fit most shelf edge type locations. Flip up front for stock control scanning. Takes up to 32mm labels. Colours available for quantity. Cut to length.
Product No.
1022-39CH
Self Adhesive Label Holder / Scanner Rail / SEL
Clear front Scanner Rail / Label Holder / Shelf Edge Label Holder (SEL) with hinge. Can be supplied with self adhesive tape applied to either side of hinge. Colours subject to minimum quantity. Can be cut to any length below 1.32m. 39mm depth
Product Nos.
920-31.5 Universal Label
920-39 Universal Label
Universal Label Holder
Co-extruded clear PVC with unique channel on back which takes clips to fit most shelf edge type locations. Takes 31.5mm label. Colours available for quantity. Cut to length.
Product No.
969-6
Wire Shelf Clip
Extruded clear PVC 15mm long Shelf Clip. Fits between the vertical wires of shelves onto 6-8mm horizontal bars.
Product No.
968-6
Wire Basket Clip
Extruded clear PVC 35mm long Wire Basket Clip. Fits 6-8mm wire baskets, shelves, risers and horizontal rods
Product No.
927
Label Holder for Metro Shelving
Clear PVC designed for secure fit to metro shelving, can be mounted at twin angles or flush fit. Can be cut to required length. 39mm label depth
Product No.
585-CLHT
Flexible Hinge with Tape
Clear PVC flexible 19mm wide hinge (closed) supplied with 2 strips of 15mm clear high tack tape. Cut to length. Can be used for doubling scanner rail or adding barkers that will swing when knocked